Fantech is proud to partner with Energy Star to provide energy efficient bath ventilation products for your home. In fact, more than two-thirds of Fantech Premium Bath Fans exceed the minimum standards required for Energy Star Qualified products.

See Quick View Selection Guide to easily identify models that carry the Energy Star symbol.

Unlike standard exhaust fans, the motor of a Fantech fan mounts in a location away from the living area such as an attic. Small unobtrusive Ceiling Grilles, with or without lights, can be mounted in multiple locations over the shower, the toilet and/or the tub then ducted to the remote fan to quickly and efficiently whisk away moisture, steam and odors. One fan can also be used to ventilate two bath-to-back baths.

• Improved Airtight Design
• Longer Quick-Connect Duct Collar
• Hanger Bars Extend to 24" OC*
• Set Screw Locks Hanger Bars in Position
• Key Hole Mounting Slots
• UL “Wet Location” Rating
• IC “Insulation Contact” Rating
* PB190, PB370, PBV6 hanger bars extend to 16" OC.

All models are UL Listed for use in wet locations.
HVI (Home Ventilating Institute) certified for performance.
All models are IC Rated.

A small-scale grille mounts in the ceiling while the fan motor mounts in a remote location away from the living area. The result is quiet yet powerful ventilation that is sure to protect your home from the damaging effects of moisture, steam and mold.

7" Ceiling Grille with
Halogen Light - Dimmable for
Night Light Setting

UL Listed for Wet Locations

PB190 Premium Bath Fan (not shown)
190 CFM fan, one Ceiling Grille, and grille housing with damper. Uses 6" duct. Grille housing fits between 2 x 8 construction. Energy Star Qualified.

1. Use insulated flexible duct. (Insulated flex duct allows sound from the fan to dissipate gradually so that it can not be heard in the bathroom.)

2. Ideally you should have at least 8 feet of flex duct between ceiling grilles and fan.

3. If applicable, use multiple ceiling grilles or ceiling grilles with lights.

ASHRAE ( American Society of Heating, Refrigerating and Air Conditioning Engineers) recommends that controls be installed on bath fans for low level continuous or intermittent ventilation.

Ventech Programmable Controls can do all that and more! (See below for complete description.)

Gone are the days of a single bath fan in the center of the room. The key to proper ventilation in oversized baths filled with luxurious amenities is true spot ventilation at the source.

Quick removal of moisture at the source will keep your beautiful bath free of mold and the effects of extreme moisture.

Fantech has developed its Premium Bath Fans so that one remote mounted fan motor can effectively ventilate several areas of the bath.

Ceiling Grilles or Ceiling Grilles with Lights can be easily positioned over showers, whirlpool tubs, steam showers, toilet and vanity.

Premium Bath Combination Units.

Combo units include one exhaust fan, one lit and one unlit Ceiling Grille. A single model number provides the exact bath fan components to install an effective two-location exhaust system.

Want to add an additional exhaust location? Just choose an additional Ceiling Grille with or without a light to turn your one or two location bath fan into a fabulous multiport system.

UL Listed for Wet Locations

All models:

UL Listed for Wet Locations

PBW110H Exterior Wall Mount Bath Fan with Dimmable Halogen Light 120 CFM fan, one Ceiling Grille with Light, grille housing with damper and 50 watt halogen bulb. UL Listed for wet locations.