Fantech: Accessoires - Controls & Switches

Améliore la Qualité de l'air intérieur Grâce à une meilleur Ventilation

Accessoires - Controls & Switches

Nous sommes désolé de vous annoncer que nous avons
aucune litérature française pour ce produit pour le moment.

Pressure Switches

DB 10

Dryer boost switch. Automatic pressure switch allows for fully automatic operation of dryer booster fan. Fan runs for 10 minutes when positive pressure is sensed in the duct line then shuts off and turns on again as needed. Switch suitable for 115 volt supply. 2 amp rating.

UPC #12010

Dimensional information in inches.

FPS 10

Pressure switch. Adjustable between 0.05" to 1.0" water differential pressure. Using either positive or negative pressure sensing for duct line. Switch suitable for 115 volt supply. 10 amp rating.

UPC #12012

Dimensional information in inches.

Variable Speed Controllers

SCD Series

Slide type variable speed controller with on/off switch. White Decora-style switch plate and screws included. Fits standard single gang box.

Note: Model SCD 7 protrudes 5/8-inch from wall.

Model	UPC #	Volts	Amps
SCD 5	56055	115	5
SCD 7	56075	115	7

WC Series

WC15 and WC25 (2 wire) rotary type variable speed controller with on/off switch. Brushed aluminum switch plate and screws included. Fits standard single gang box. WC15H (4 wire) contains all the features as the WC15 with a high speed bypass.

Model	UPC #	Volts	Amps
WC 15	56005	115	5
WC 15H	56008	115	5
WC 25	56006	220	5

RPE Series

Heavy duty rotary type variable speed controller with on/off switch. Brushed aluminum switch plate and screws included.

Model	UPC #	Volts	Amps
RPE 10	56010	115	10
RPE 15	56015	115	15
RPE 210	56210	230	10

Timers

FD 60EM

Electronic push button timer. Select from 10, 20, 30 and 60 minute timed operation of fan. Includes Decora style white switch plate and screws. Fits standard single gang box. Ideal for multiple switching locations. Switch suitable for 115 volt supply. 20 amp rating.

UPC #73200

FD 30M

Mechanical crank timer. Select from 1 to 30 minutes of timed fan operation. Switch suitable for 115 or 230 volt supply. 7 amp rating. Use with Decora-style or standard white face plate (not included). Suitable for multiple switching locations.

UPC #73030

FLD 60

Fan/Light delay timer switch. Allows continous operation of the fan for up to 1 hour after light switch is turned off. Switch suitable for 115 volt supply. 5 amp rating. Brushed aluminum switch plate and screws included. Suitable for single switching location.

UPC #73060

RTS2

15-minute timer with LED light for use with Fantech Heat Recovery and Energy Recovery Ventilators. Works as an override switch to turn HRV or ERV on high speed for 15 minutes. Up to five timers can be used. Install in bathrooms, kitchen or laundry – where ever easy-access wall control is needed.

UPC #13462

EDF1

Triple-Function Wall Control
It's easy to control your home's indoor air quality system with this triple function wall control.
Press the button once to run your HRV/ERV at a continuous low speed (Green).
Press the button twice and the unit will run 20 Minutes On/40 Minutes Off (Yellow). The cycle repeats continuously.
Push the button three times and the system will run continuously on high speed (Red).

RTS3

Intermittent Timer
The ideal control for those areas of the home where excess moisture, steam and odors are created.
Press the button once to energize your HRV/ERV system to high speed for 20 Minutes (Green).
Press the button twice and the unit will run for 40 Minutes at high speed (Yellow).
Press the button three times and the unit kicks to high speed for 60 minutes (Red). When time expires the unit will return to its original setting.

Humidistat Controller

FH 20

Wall mounted dehumidistat. Adjustable between 20% and 80% relative humidity. Switch suitable for up to 115 volt supply. 7.5 amp rating. White.

UPC #73020

Attic Thermostat

FAT 10

Thermostat for use with attic ventilation systems. Adjustable between 80^o and 130^oF. Switch suitable for 115 volt supply. 10 amp rating.

UPC #29110

Air Screen Controllers

AS DS

Cast metal and plastic plunger style door switch. Switch suitable for 115 or 230 volt supply. 15 amp rating. Designed for use with Fantech Air Screens AC-3600 through AS-6012.

UPC #29101

AS TS

Two-stage thermostat for heated Air Screens. Switch suitable for 115 or 230 volt supply. 7 amp rating.

UPC #29105

HRV/ERV Controls

EDF5

Control multiple functions of your Fantech HRV/ERV with one slimline wall control.Two-wire connection simplifies installation. Use one EDF5 per HRV/ERV installed.

Dehumidistats

MDEH 1

2-wire low voltage dehumidistat control with rotary dial. Just turn the dial to set the humidity level. Multiple units can be used with Fantech HRV's. Install in bath-rooms, kitchen or laundry for easy access.

UPC# 13474

MDEH 2

4-wire low voltage dehumidistat control with power indicator light and on/off switch. Dial lights up when dehumidistat turns unit to high speed. Use one per HRV system. (Do not use with EDF5.)

UPC# 13476

AQS 1

Air Quality Sensor for use with Fantech HRV/ERV systems. Automatically senses pollutants and activates HRV/ERV to high speed if levels exceed normal condition. Features indicator light that changes color to indicate level of pollution in the home. Pushbutton override switch sets unit to run 1,2 or 3 hours at high speed.Three-position for efficient operation. Use one per HRV/ERV system.

UPC# 13472

MPG 05

Magnehelic Pressure Gauge for measuring and balancing airflow. (0.50"/2000-OD). Shown here with optional accessories. For complete list of available acces-sories see Fantech Price List.

UPC# 23096

Literature Request

Fantech se réserve le droit de modifier partiellement ou entièrement, en tout temps et sans préavis, les caractéristiques, la conception, les composants et les spécifications de ces prduits afin de conserver sa position de leader en matière de technologie.