| |
FRD
Series Fans
|
If you do not
have Adobe
Acrobat Reader, click here.
|
Fantech FRD12-6,
open view. |
Inline Centrifugal
Fans for
Square and Rectangular Duct
the solid choice for
commercial strength with economical operation
Maintenance made easy thanks to these FRD
features:
- Galvanized
steel housing features baked powdercoat
finish
- Hinged
door for service access
- External
rotor motor for excellent heat
dissipation even at low RPM, and built-in
thermal overload protection with
automatic reset.
- Suitable
for airstream temperatures of up to 140°
F
- Tested
and approved by UL and CSA (or equals)
- Class
B insulation and sufficient service
factor provided to ensure long and
maintenance free operation over maximum
load conditions
- 100%
speed controllable through voltage
reduction, allowing for precision
balancing of systems, and efficient,
economical airflow
- Units
can be provided with 115/1/60 or
208-230/1/60
- Permanently
lubricated sealed ball bearings
- Airflow
up to 2318 CFM
- Rectangular
ductwork connections
- Terminal
box with prewired electrical strip
- True
airfoil backward curved impeller
- Excellent
heat dissipation, ensuring long motor
life
- Three-year
warranty
Fantech FRD Series Maximum power in a minimum of
space
Limited
space? No problem. Fantech's FRD Series
centrifugal type exhaust/supply fans are
specifically designed for large ventilation needs
where space is at a premium, such as hospitals,
schools, or office buildings. System balancing is
easy. A simple speed adjustment equalizes all
vents to compensate for hot or cold spots. And
because the non-overloading backward-inclined
wheels allow lint to pass through the blades, FRD
Series fans are also ideally suited for use as
duct booster fans in commercial dryer
applications.
Direct-to-duct installation
The
compact housing design of the FRD Series allows
for installation directly within rectangular
ductwork (ranging from 12x6" ducts to
24x14" ducts), without the need for large
elbows or transitional sections.
FRD Series fans are simple to install; no extra
materials are required. Simply mount the fan at
any angle in any point in the ductwork. The motor
is mounted on a hinged door - just swing the door
out for easy access to the motor and wiring
connections.
Fantech FRD24-14 open and closed views.
Inline
Duct Accessories
Fantech
reserves the right to modify, at any time and
without notice, any or all of its products'
features, designs, components and specifications,
to maintain their technological leadership
position.
|
