Radon is a health hazard with a simple solution

Family home with a radon fan

Radon is everywhere! You can’t see radon and you can’t smell it or taste it. But it may be a problem in your home. According to the EPA radon is estimated to cause 21,000 lung cancer deaths per year!

Radon comes from the natural (radioactive) breakdown of uranium in soil, rock and water and gets into the air you breathe. Radon is all over the US in every type of building, however you and your family are most likely to get your greatest exposure at home, where you spend most of your time. 

Testing is the only way to know if you and your family are at risk. Testing is easy and inexpensive; most hardware stores carry Radon Test Kits. The EPA recommends that you mitigate your home if the radon level is above 4 Picocuries per liter (4pCi/L).

The good news is that reducing the levels is not hard but requires the technical knowledge of a qualified mitigator. Check with your state Radon office for names of qualified or state certifiedradon contractors in your area.

For over 30 years Fantech a leader in the ventilation industry have been providing Radon mitigation fans for family homes. You can trust Fantech to provide a ventilation solution for your Radon problem.

Art nr: 89051

Rn1 Inline Radon Fan

Installing a radon fan will keep the radon gas from rising through the home’s foundation and entering the building envelope. Designed for application where lower pressure and flow are needed.

Art nr: 89052

Rn2 Inline Radon Fan

Has an ideally tailored performance curve for a vast majority of radon gas mitigations that require medium air flow and suction. The gas is exhausted above the eave of the building via a sealed pipe system.

Art nr: 95909

LDVI® 4x4 Bulk Pack, 36 pcs

While making your installation job easier, these couplings provide superior vibration isolation. No mechanical noise will be transferred to the exhaust pipe. Couplings come in a bulk package.

Art nr: 89053

Rn3 Inline Radon Fan

Excellent choice for radon gas mitigation systems with elevated radon levels, poor communication, multiple suction points and/or large sub slab footprint. High air flow, medium suction.

Art nr: 48337

Rn4-4 EC Inline Radon Fan

Designed for application that require high suction and air performance as well as great air flow rates at lower suction pressures. Integrated control system allows for “dialling in” the fan speed necessary to achieve either the required sub-slab depressurization or required system air flow rate.

Art nr: 95916

PFEDK Rn Diagnostic Tool Kit

Allows radon mitigators accurately sizing any sub-slab depressurization application up to 4.4” Static. Measure, analyse, select the right fan to your job and gain instant credibility in your clients’ eyes.